My Intel Galileo feels hot to the touch.
Is that ok? I am using the little switching power supply that came in the box...Maybe its ok and I just dont realize it?
View ArticleI need a driver for an unknown device with a hardware ID "ACPI\Int33A0"
I'm building a WES7 image for the Advantech MIO-5250 cpu which uses Intel's N2600 atom.WES7found a device when I enabled ACPI in the BIOS, but device manager shows it as an unknown device.So I need a...
View ArticleRe: My Intel Galileo feels hot to the touch.
Hi PBradyldentiv, Can you specify what part of your Galileo gets hot? If its the Quark processor, that's normal. Regards,Intel_Jesus
View ArticleAre intel HD 4400 Graphics inherently dull in color?
Was just wondering if intell HD 4400 graphics are suppose to be dull in colo and dim. For instance the online game Tera I have seen footage of other people with the same graphics on a lesser system...
View ArticleCan you wear out an Intel SSD with a true workload?
Intel has 3 types of SSD endurance levels. 0.3 drive writes per day (standard), 3 drive writes per day (mid-endurance) and 10 drive writes per day(high endurance). Drive writes per day is exactly how...
View ArticleClik here to view.
Re: Intel SSD 530 startup problems - Bug in SSD?
I've been trying to get a a 530SSD recognized on an Asus P8P67 Deluxe motherboard with no success, even with the latest 3.2.1 toolbox upgrade. It seems it is not recognized in the BIOS on either the...
View ArticleRe: D54250WYK seems to be bricked
Yes - 3 seconds was the secret - I was just stabbing the power button. Now I can try another install. Thank you
View ArticleRe: Dual Wireless-n 7260 reduces connection speed after a few minutes
I just did a clean install of the new 17.0.2 drivers. It still did not solve the problem on my Thinkpad Yoga. With HT mode enabled I would have terrible connection stability and low speed.I would get...
View ArticleDB85FL Restarts due to Epson Printer being on.
I have a desktop PC running Windows 7 Pro x64. If I do a Windows shutdown while my Epson WF 3520 All in One Printer is powered on, it goes off for a few seconds then boots up again. This started after...
View ArticleRAID 1 question
I have Intel Desktop Board D975XBX1. Running 1 drive for C: (Windows OS) and E (RAID 1 running 2 x 1TB drives) for data drive(s). Question is can I also configure 2 drives for C:? I notice this board...
View ArticleSD Card Shields do not work on Intel Gallileo
Hello, for performance tests, I want to move my project, which I have developed on the Arduino DUE to the Intel Gallileo... Well, the problem is now the SD-Shield... For some reasons the SD shield wont...
View ArticleBoot error on USB devices + 3G modem not working - D945GCLF2
Hi, I have this D945GCLF2 board, 2GB A-DATA memory, a Samsung 322GJ HDD, and here are my known problems:- USB does not work normally any more (I don't know since when);- audio is dead (I have an USB...
View ArticleIntel Desktop Board D 850 GB - Error in 12V-Line
Hallo @ all, my name is Torsten, I am german but living in Paraguay. My profession is graduate engineer for electronic components. Yesterday here we have had a power blackout and after this my computer...
View ArticleRe: Haswell NUC - No Signal when switching source
I have just bought the new 34010 today and have had a nightmare so far. All the years of building PC's and I've never had problems like this. I set the machine up in the back room with the machine...
View ArticleIntel haswell nuc 34010 - no signal when switching source!
I have just bought the new 34010 today and have had a nightmare so far. All the years of building PC's and I've never had problems like this. I set the machine up in the back room with the machine...
View ArticleClik here to view.
Re: SD Card Shields do not work on Intel Gallileo
I don't see any SD Card shields listed in the List of Supported shields document, however that hasn't been updated sine 1st January this year.You can also check out the Getting Started document which...
View ArticleRe: Latest driver supporting 3rd and 4th Generation Intel® Core™ Processors...
Beware...NUC D54250WYKH with Windows 8.1 cannot be reached via TeamViewer once the display, connected to via HDMI, is turned off. When will there be an update to this issue? This is quite a drawback...
View ArticleRe: WiFi not working at all
Oh boy, it looks as if I overlooked that part. Thanks a lot, Jan & Schrand, I'll try that right away as soon as I can & report back.
View ArticleRe: Latest driver supporting 3rd and 4th Generation Intel® Core™ Processors...
Unfortunately you are correct.Follow this thread for the fix (when they deploy it):D54250WYK 'headless' issue? Note - uninstall the intel drivers and use the windows-only ones if you want to be able to...
View Article