Hi guys,
I know this question has been asked before, but they are of no help to me.
I updated my motherboard, a DH77KC from the factory 69 to 95 as per a recommendation to a previous question I had that my motherboard would only occasionally start if I reset the BIOS.
Anyways, I updated to 95 and shut down my PC. I removed the flash drive, plugged power back in and turned on the PC. I went through it's normal configuration and started up Windows without issues. I then shut down the PC and upon turning it back on, it gave me 3 beeps a short pause and 3 beeps afterwards. I did a Google around this and found that it might be memory related.
Now, I ensured that all memory bricks are seated correctly and thoroughly. I even started up with a single brick in different sockets but nothing, so I'm assuming this has something to do with the BIOS update I did just before? A can't start up the system now to revert my update to 69 nor can I get passed the 3 beeps.
I've removed the BIOS battery from the socket and turned off the machine in order to allow a full reset to cycle. I will try again, but I'm sure the 3 beeps will be the when I turned on the machine again.
Any help on this would be appreciated.
Eric