Hi,
I recently converted my board to RAID configuration and installed four HDD's into RAID 5. I have another SSD outside the RAID for the OS. So all my internal SATA connections are occupied. I intended to use the external eSATA connection for an internal hard disk enclosure that is built into my case. It is possible because I have holes for cables (originally - water cooling system) in my case. But it doesn't work. I've tried another cable, and I verified that the enclosure work when i connected it to internal SATA. Is it possible that the board defective? Should I change configuration \ rewire something in the board to make it work?
thanks!