John:
I have 2 issues:
1) Linux fails to boot when I unplug one of the drives in a RAID0 implemented on the RS25DB08
2) sometimes one of the SSDs in the RAID0 will go offline without user intervention. When you run the megaCli -PDList -aAll command on the Linux shell, the state of the bad drive is "Firmware State: Unconfigured (bad)". If you rebuild the RAID array, the drive will be successfully incorporated into the RAID array, its Firmware state will be "Online, Spun Up" and the logical drive is usable again. You can remove the "bad" SSD drive and insert it into another machine and the drive functions normally. I have not been able to duplicate this problem. It has been reported from some of our customers though.
Have any of your other customers reported these problems?
Neil